Basic Info.
Natural Abrasive Type
Artificial Abrasive
Artificial Abrasive Type
Synthetic Abrasive
Application
Abrasive Material
Source
Artificial Abrasives
Export
90% Exported,Mainly Export to Japan
We Are Expert
Only Porducing Green Silicon Carbide Decades Years
Customized
Can Cusomized According to Customer′s Rigid Demand
Color
Good Color of Green
Short Lead
Quick Delivery
Abundent Export Experience
International Trade with Over 15 Year Experience
Considerate Service
All Mails Will Be Replied Within 24 Hours
Transport Package
1mt Jumbo Bag or 25kgs Smal Bags in 1mt Jumbo Bag
Specification
SiC 99% min, F. C. 0.3% max Fe2O3 0.3% max
Product Description
Descriptions
Silicon carbide (SiC), also known as carborundum, is a compoundof siliconand carbonwith chemical formula SiC. It occurs in nature as the extremely rare mineral moissanite. Silicon carbide powder has been mass-produced since 1893 for use as an abrasive. Grains of silicon carbide can be bonded together by sinteringto form very hard ceramicswhich are widely used in applications requiring high endurance, such as car brakes, car clutches and ceramic platesin bulletproof vests. Electronic applications of silicon carbide as light emitting diodes(LEDs) and detectorsin early radios were first demonstrated around 1907, and today SiC is widely used in high-temperature/high-voltage semiconductor electronics. Large single crystals of silicon carbide can be grown by the Lely method; they can be cut into gems known as synthetic moissanite. Silicon carbide with high surface area can be produced from SiO2contained in plant material.
Green Silicon Carbide (SiC) is mainly made of Quartz sand, petroleum coke, smelted by above2500°C in the electric furnace. The hardness is between corundum and diamond. The Hardness is superior to corundum, it has the function of conductivity and thermal conductivity. It is suitable to process metals and non-metallic materials, such as gray cast iron, non-ferrous metal, stone, leather, rubber, and on on.
Green Silicon Carbide is extremely pure & extremely hard, coming in at a Knoop 2600. It is typically only used for high tech, critical applications due to its cost. Like black silicon carbide, it will splinter as it breaks down, making excellent for recycling. It is the media of choice for wire sawing and sintering. It also has a high thermal conductivity.
Silicon carbide is produced in two main qualities depending on the raw materials-black and green Sic - where the green use higher purity raw materials and thus have a slightly higher purity which used in some special abrasive and ceramic applications.
We offer all grades, many of which are available for purchase online in small quantities.
HIJO Abrasives offers a whole range of macro and micro grits in green silicon carbide, quality and various particle size distributions based on FEPA, and JIS standards.
Green Silicon Carbide Macro Grit
Chemistry and Bulk Density |
| Chemical Analysis | Bulk (Loose Pack) Density: |
Grit No. | Min. % SiC | Max. % C | Max. %SiO2 | Max. % Fe2O3 | Min. | Max. | |
F 8 | 99,00 | 0,30 | 0,50 | 0,30 | 1,35 | 1,43 |
F 10 | 99,00 | 0,30 | 0,50 | 0,30 | 1,35 | 1,44 |
F 12 | 99,00 | 0,30 | 0,50 | 0,30 | 1,41 | 1,49 |
F 14 | 99,00 | 0,30 | 0,50 | 0,30 | 1,42 | 1,50 |
F 16 | 99,00 | 0,30 | 0,50 | 0,30 | 1,43 | 1,51 |
F 20 | 99,00 | 0,30 | 0,50 | 0,30 | 1,44 | 1,52 |
F 22 | 99,00 | 0,30 | 0,50 | 0,30 | 1,44 | 1,52 |
F 24 | 99,00 | 0,30 | 0,50 | 0,30 | 1,45 | 1,53 |
F 30 | 99,00 | 0,30 | 0,50 | 0,30 | 1,45 | 1,53 |
F 36 | 99,00 | 0,30 | 0,50 | 0,30 | 1,46 | 1,54 |
F 40 | 99,00 | 0,30 | 0,50 | 0,30 | 1,47 | 1,55 |
F 46 | 99,00 | 0,30 | 0,50 | 0,30 | 1,47 | 1,55 |
F 54 | 99,00 | 0,30 | 0,50 | 0,30 | 1,46 | 1,54 |
F 60 | 99,00 | 0,30 | 0,50 | 0,30 | 1,46 | 1,54 |
F 70 | 99,00 | 0,30 | 0,50 | 0,30 | 1,45 | 1,53 |
F 80 | 99,00 | 0,30 | 0,50 | 0,30 | 1,44 | 1,52 |
F 90 | 99,00 | 0,30 | 0,50 | 0,30 | 1,43 | 1,51 |
F 100 | 99,00 | 0,30 | 0,50 | 0,30 | 1,42 | 1,50 |
F 120 | 99,00 | 0,30 | 0,50 | 0,30 | 1,40 | 1,48 |
F 150 | 99,00 | 0,30 | 0,50 | 0,30 | 1,38 | 1,46 |
F 180 | 99,00 | 0,30 | 0,50 | 0,30 | 1,38 | 1,46 |
F 220 | 99,00 | 0,30 | 0,50 | 0,30 | 1,36 | 1,44 |
Remark:
The above listed data is only for your reference, exact specification and sizes will be made strictly according to your rigid requirement.
All chemical copositions, specifications sizes, density and packages could be customized.
For detailed information, you are warmly welcome to visit our official website: hijo168.en.made-in-china.com
Grain composition of green sic according to FEPA |
Grit | Test Sieve | Q6max, % |
1 | 2 | 3 | 3 and 4 | 3, 4, and 5 |
W1, mm (mkm) | Q1, % | W2, mm (mkm) | Q2max, % | W3, mm (mkm) | Q3min, % | W4, mm (mkm) | Q3+Q4min, % | W5, mm (mkm) | Q3+Q4+Q5min, % |
F8 | 4,00 | 0 | 2,80 | 20 | 2,36 | 45 | 2,00 | 70 | 1,70 | * | 3 |
F10 | 3,35 | 0 | 2,36 | 20 | 2,00 | 45 | 1,70 | 70 | 1,40 | * | 3 |
F12 | 2,80 | 0 | 2,00 | 20 | 1,70 | 45 | 1,40 | 70 | 1,18 | * | 3 |
F14 | 2,36 | 0 | 1,70 | 20 | 1,40 | 45 | 1,18 | 70 | 1,00 | * | 3 |
F16 | 2,00 | 0 | ,40 | 20 | 1,18 | 45 | 1,00 | 70 | (850) | * | 3 |
F20 | 1,70 | 0 | 1,18 | 20 | 1,00 | 45 | 850) | 70 | (710) | * | 3 |
F22 | 1,40 | 0 | 1,00 | 20 | (850) | 45 | (710) | 70 | (600) | * | 3 |
F24 | 1,18 | 0 | (850) | 25 | (710) | 45 | (600) | 65 | (500) | * | 3 |
F30 | 1,00 | 0 | (710) | 25 | (600) | 45 | (500) | 65 | (425) | * | 3 |
F36 | (850) | 0 | (600) | 25 | (500) | 45 | (425) | 65 | (355) | * | 3 |
F40 | (710) | 0 | (500) | 30 | (425) | 40 | (355) | 65 | (300) | * | 3 |
F46 | (600) | 0 | (425) | 30 | (355) | 40 | (300) | 65 | (250) | * | 3 |
F54 | (500) | 0 | (355) | 30 | (300) | 40 | (250) | 65 | (212) | * | 3 |
F60 | (425) | 0 | (300) | 30 | (250) | 40 | (212) | 65 | (180) | * | 3 |
F70 | (355) | 0 | (250) | 25 | (212) | 40 | (180) | 65 | (150) | * | 3 |
F80 | (300) | 0 | (212) | 25 | (180) | 40 | (150) | 65 | (125) | * | 3 |
F90 | (250) | 0 | (180) | 20 | (150) | 40 | (125) | 65 | (106) | * | 3 |
F100 | (212) | 0 | (150) | 20 | (125) | 40 | (106) | 65 | (75) | * | 3 |
F120 | (180) | 0 | (125) | 20 | (106) | 40 | (90) | 65 | (63) | * | 3 |
F150 | (150) | 0 | (106) | 15 | (75) | 40 | (63) | 65 | (45) | * | 3 |
F180 | (125) | 0 | (90) | 15 | (75) | * | (63) | 40 | (53) | 65 | * |
F220 | (106) | 0 | (75) | 15 | (63) | * | (53) | 40 | (45) | 60 | * |
* - not regulated |
|
W1, W2, W3, W4, W5 - cell size of 1, 2, 3, 4 and 5 sieve in light |
Q1, Q2, Q3 - rest of grinding material on sieves 1, 2 and 3; |
Q3+Q4 - total rest of grinding material on sieves 3 and 4; |
Q3+Q4+Q5 - total rest of grinding material on sieves 3, 4 and 5; |
Q6 - rest of grinding material on pallet. |
Physical Characteristics:
Crystal Form: | Alpha-Alumina | | |
True Density: | 3.2 g/cm3 | | |
Hardness: | Knoop (100) - 2500; Mohs 9.0+ | | |
Melting Point: | SiC does not melt but dissociates | | |
Color: | Green | | |
Particle size distribution for available grits in FEPA Standard |
Grit size | 3% max., | 50% min., | 94% min., | Grit size | 3% max., | 50% min., | 94% min., |
larger than, | in size range, | larger than, | larger than, | in size range, | larger than, |
um | um | um | um | um | um |
F12 | 2000 | N/A | 1400 | F120 | 125 | N/A | 90 |
F14 | 1700 | N/A | 1180 | F150 | 106 | N/A | 63 |
F16 | 1400 | N/A | 1000 | F180 | 90 | N/A | 53 |
F20 | 1180 | N/A | 850 | F220 | 75 | 50.0-56.0 | 45 |
F24 | 850 | N/A | 600 | F230 | 82 | 50.0-56.0 | 34 |
F30 | 710 | N/A | 500 | F240 | 70 | 42.5-46.5 | 28 |
F36 | 600 | N/A | 425 | F280 | 59 | 35.0-38.0 | 22 |
F40 | 500 | N/A | 355 | F320 | 49 | 27.7-30.7 | 16.5 |
F46 | 425 | N/A | 300 | F360 | 40 | 21.3-24.3 | 12 |
F54 | 355 | N/A | 250 | F400 | 32 | 16.3-18.3 | 8 |
F60 | 300 | N/A | 212 | F500 | 25 | 11.8-13.8 | 5 |
F70 | 250 | N/A | 180 | F600 | 19 | 8.3-10.3 | 3 |
F80 | 212 | N/A | 150 | F800 | 14 | 5.5-7.5 | 2 |
F90 | 180 | N/A | 125 | F1000 | 10 | 3.7-5.3 | 1 |
F100 | 150 | N/A | 106 | F1200 | 7 | 2.5-3.5 | |
Applications
For abrasives, grinding of electronics, metallurgical additive.For special ceramics, foam ceramicsFor auto parts, war industry and aviation, steelmakingFor abrasive and cutting tools and Cutting disks made of SiCFor grinding, honing, water-jet cutting and sandblasting.For lapping and polishing ,metallurgical additive and refractory material.
Property
Low densityHigh strengthLow thermal expansionHigh thermal conductivityHigh hardnessHigh elastic modulusExcellent thermal shock resistanceSuperior chemical inertness
ABOUT US
Shandong HIJO Precision Abrasives Co., Ltd. , located in Caozhuang Industrial Park, Linyi City, Shandong Province, China(About 260kms to Qingdao Port, China; about 100kms to Lianyungang Port, China), is one of a leading manufacturer of Green Silicon Carbide both in Macro and Micro grit sizes in China. We specialized only in producing Green Silicon Carbide Grains/Powders and have decade of years of experience in Green Silicon Carbide crushing, sizing and processing. We provide high quality specialty Green Silicon Carbide Grains/Powder to meet our customers' rigid specifications.
Our green Silicon Carbide are available in both macro and micro sizing. If you have special sizing or chemistry requirements, we have the ability to provide both custom particle sizing and custom chemistries as needed. We also offer other value added solutions to your product needs through custom packaging, shipping, and logistical management. All of our green Silicon Carbide are certified by our in house lab as well as verified by outside labs. This ensures the materials meet the specific stringent requirements of each of our customers.
HIJO Abrasives offers short lead times, excellent quality, competitive prices. We are committed to continual improvement and superior customer service! Contact us today to allow us to serve your needs.
Address:
Caozhaung Industrial Park, Linshu County, Linyi, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Chemicals, Metallurgy, Mineral & Energy, Tools & Hardware
Management System Certification:
ISO 9001
Company Introduction:
Shandong HIJO Precision Abrasives Co., Ltd. (Abbreviated as "HIJO Abrasives" below), located in Caozhuang Industrial Park, Linyi City, Shandong Province, China(About 260kms to Qingdao Port, China; About 100kms to Lianyungang Port, China). We are a leading manufacturer specialized only in producing Green Silicon Carbide both in Macro and Micro grit sizes in China. We provide high quality specialty Green Silicon Carbide Grains/Powder to meet our customers′ rigid specifications.
HIJO Abrasives has been focused on Green Silicon Carbide Grains/Powders for decades of years and have abundant experience in Green Silicon Carbide crushing, sizing and processing, we are expert of green silicon carbide grains/powders. To get super quality of grains, we specially process the lumps of the green silicon carbide, separate the magnetic material, and sieve the grains carefully to get a complete range of grit sizes.
High purity, good in color, better density, water classified green silicon carbide graded to exacting standards, e. g. FEPA, JIS and custom. HIJO Abrasives′ green silicon carbide grains are manufactured by various techniques to optimize shape, surface area, density, chemistry and/or particle size distribution for various applications.
HIJO Abrasives offers short lead times, excellent quality, competitive prices and considerate service. We are committed to continual improvement and superior customer service!
Contact us today to allow us to serve your needs.